Vol. 112 No. 4 (2023)

Published: 2023-12-15

Full Issue

PHYSICS OF THE CONDENSED MATTER

  • Effect of TNR/Ag/rGO film area on its photocatalytic activity

    A.S. Kayumova, S.V. Savilov, P.A. Zhanbirbayeva, A.S. Baltabekov, M.S. Dzhakupova, T.M. Serikov
    6-13
    DOI: https://doi.org/10.31489/2023ph4/6-13
  • Impact of the thickness of phthalocyanine films and its metal complexes on optical and electrical properties

    S.K. Tazhibayev, M.K. Beisembekov, X.S. Rozhkova, A.M. Zhakanova, A.K. Aimukhanov, A.T. Makhabayeva, A.K. Zeinidenov
    14-22
    DOI: https://doi.org/10.31489/2023ph4/14-22

TECHNICAL PHYSICS

  • Simulation of the influence of parameters of disturbing vibration accelerations on the operation of a new two-channel transformer gravimeter

    E.N. Bezvesilnaya, Y.V. Kyrychuk, M.S. Hrynevych, T.A. Tolochko
    23-37
    DOI: https://doi.org/10.31489/2023ph4/23-37
  • Numerical modelling of multi-component mass transfer regimes in four-component gas systems

    O.V. Fedorenko, V.N. Kossov, S.A. Krasikov, M. Zhaneli, T. Seydaz
    38-49
    DOI: https://doi.org/10.31489/2023ph4/38-49
  • Development of technology for creating high-voltage p0–n0 junctions based on GaAs

    A.M. Sultanov, A.A. Abdukarimov, M.Z. Kufian
    50-56
    DOI: https://doi.org/10.31489/2023ph4/50-56
  • The glass transition temperature investigation of polymers by molecular dynamic simulations

    P. Saidakhmetov, I. Piyanzina, G. Baiman, O. Nedopekin, D. Tayurskii
    57-64
    DOI: https://doi.org/10.31489/2023ph4/57-64
  • Dynamic response of unsupported and supported cavities in an elastic half-space under moving normal and torsional loads

    V.N. Ukrainets, S.R. Girnis, K.T. Makashev, V.T. Stanevich
    65-75
    DOI: https://doi.org/10.31489/2023ph4/65-75
  • Mechanochemical synthesis of AlCoCrFeNi powders via high-energy ball milling

    Y.Y. Kambarov, A.B. Kengesbekov, Zh.B. Sagdoldina, D.B. Buitkenov
    76-81
    DOI: https://doi.org/10.31489/2023ph4/76-81

THERMOPHYSICS AND THEORETICAL THERMOENGINEERING

  • Determination of the effects of the diameters of the throttle holes on the fluid flow of an inertial hydrodynamic installation

    B.R. Nussupbekov, M.S. Ovcharov, E.Z. Oshanov, U.B. Yesbergenov, M.S. Duisenbayeva, A.A. Tishbekov, M.K. Amanzholova
    82-90
    DOI: https://doi.org/10.31489/2023ph4/82-90
  • Possibility of using inexpensive steel protected by deposited vacuum-arc coatings as a basis for parts and tools coating technology

    A.T. Berdibekov, V.Ch. Laurinas, A.V. Dolya, V.V. Gruzin, S.A. Guchenko, A.S. Baltabekov
    91-95
    DOI: https://doi.org/10.31489/2023ph4/91-95